Author: admin

Posted on by

Two Queens in One Hive

Most beekeeping books and beekeepers will always agree that there is always one active queen in a hive.  There should never be two.  Even so, it sometimes does happen.

The hive that this picture was taken from was a big
one.  It over wintered very well and it built up extremely early.  The queen was a prolific layer.  The bees managed to produced a box of ross rounds, a box of comb honey and filled two honey supers.  After the honey was removed for the season we tested and treated for mites because, as is true with all large colonies, there were mites present and even signs of deformed wing virus.

There was a possible risk candidate for throwing a swarm since the hive was congested.  The queen also did not stop laying eggs.  Since nectar flow in this area virtually stops after July we were feeding, but it did not help much.  The hive most likely built some swarm cells in between our more detailed inspections.

When we finally did a detailed inspection there was evidence of many swarm cells and it appeared that there were many queens released.  At least one left with a swarm.  One daugher appeared to stay behind with mom.

Mite levels were high before treatment.  Treatment started before the swarm occurred.  After the mite treatment we found very low mite counts.  There were plenty of eggs being laid, but not really enough workers.  This late in the season it would be fair to predict failure.  Only time will tell if this hive will survive. Did the prolific queen cause the hive to swarm? Did the mite treatment, Thymol with oxalic dribble every seven days, cause the hive to swarm?  Did the high mite load cause the swarm?  We may never know.  We only have a few clews and the bees are not talking.

Posted on by

Oxalic Acid for Mite Control

This year we have started using oxalic acid in the spring instead of MAQS or mite away quick strips. Both oxalic acid and formic acid are present in honey and are organic acids so they are considered natural or organic miticide treatments.  Even so, they are quite harsh to work with.

Formic acid has a very strong smell.  It seems to be more potent than vinegar and more irritating.  It is very effective and tests by the MAQS manufacturer say that it will kill mites under cappings.  This is important.  Even so, we have found it to be hard on the bees and especially the queens.  It is hard to prove if they become physically damaged by my the miticide or if the prolonged exposure to the smelly acid causes the bees to think that her queen pheromone is not present, and deduce that she is failing or not actually alive anymore despite the fact that she is present.  Based on discussions we have had with other beekeepers this seems to be a problem that can happen, but it is not always a regular occurrence.   Weather and age of the queen probably play into this quite a bit as well.  We have also heard that formic acid is not as good as it used to be at killing mites.  These issues and reports are pushing us to try something new.

Oxalic acid has been used in Europe and Canada for many years.  There are two methods of application – vaporization and dribble.  Most beekeepers and scientists that study its effectiveness claim that it kills 90% or more of the mites present on the bees when the treatment is applied.  Even so it does not kill the mites under the cappings.  To do this, vaporization is commonly used to kill the mites within the open cells during periods of low or no brood rearing.  Otherwise the dribble method can be used for easy and quick application.  Randy Oliver has been studying oxalic acid recently and he does prefer the dribble method.

We applied oxalic acid to all of our colonies this spring.  The packages were vaporized with a few days of being installed in their hives.  We also treated all of our overwintered colonies three times approximately eight days apart to kill mites on the bees and in the cells that were open at the time.  Mite testing showed that at the beginning of June, our hives were mite free.  The test we used was the alcohol was test.  A sample of bees are taken, placed in the washing cup or device, rinsed with an alcohol solution, and then the mites that come off the bees are counted.  All of the samples came up zero mites!!!

We will be trying the three treatment vaporization method later in the season to see how it performs in the fall as well.

 

 

Posted on by

Wax Moth and Mice Problems

A mouse nest in a five frame Nuc box.

Wax moths and mice are common pests for bees and beekeepers.  We have had more experience dealing with them lately for some reason.  Here are some of our experiences with these two pesky pests.

Mice enjoy building nests in the depths of boxes, especially when they are stored away.  Sometimes they can get away with living at the bottom of a hive while the bees keep themselves warm and eat honey, pollen patties, and candy boards at the top of the hive.  To prevent mice infestation we always put on a mouse guard or entrance reducer that eliminate the chance of having mice enter our equipment that is out in the field.  In fact, we typically use this device year round because limiting the opening helps the hive defend against hive beetles as well.

Mouse poop and chewed up comb. All of this smelt very bad.

To prevent mice from getting into stored boxes we always store them on flat surfaces and make sure that they are fully covered.  This prevents the mice from entering and damaging the boxes and frames.

When mice get into unguarded boxes they not only make a home for themselves, but they defecate all over everything.  If there are frames of drawn comb, they will chew on the frames and eat the foundation and its contents.  This destroys the work of the beekeeper and the bees.  Urine soaked frames and boxes are virtually unusable by bees and beekeepers.

All of our honey supers are kept in our garage in the off season.  Besides honey supers we do keep some drawn comb deeps that we store for future use from time to time.  Also we have a few boxes of used frames that are waiting to have their wax melted by our wax melter and the frames cleaned and reused.

Wax moth damaged comb.

All of these things seem to draw a wax moth in.  Especially in our garage.  the drawn comb seems to be especially tantalizing to the wax moths.  Despite the fact that we use moth repellant on our supers the moths tend to find us..  It must be the old comb that we like to melt down in our wax melter that draws them in.  In the future we will be storing less of this comb.

Wax moths can only reproduce inside a bee hive, and the only way they can get on the wax comb is because the hive is weak or the beekeeper let the bees get to the precious wax.

The Lesser Wax Moth. (Achroia grisella) Top and front view.

This year we took over the management of the honey bees at a local vegetable farm.  We started by cleaning up the equipment, which was left virtually unprotected by the previous beekeeper.  This left us with less than half of the equipment in usable condition.  Wax moths and mice damage was very severe.  The pictures you see are from this experience.  Hopefully protecting comb and equipment will be everyone’s priority.

If our cleanup and management efforts are successful, the good news is that we think this new location will produce decent amounts of honey for us and the landlord.  Hopefully things will go as planned!!!

Posted on by

Friends of the Bee Yard

We always thought that these were Monarch larvae or caterpillars. We were wrong. They are the Tussock Moth Caterpillar.

When we became beekeepers we started to become more aware of what nature had going on around us.  One of the things we noticed were the other creatures that we share our bee yards with.

We took the first picture and though we were taking pictures of the famed Monarch Butterfly caterpillar.  We were happy to see them, but when we looked up information about the fuzzy friend, we found out that we were not correct with our assumption.  It is actually the Tussock Moth caterpillar that we were seeing.  They like milkweed too!  They have a distinctive appearance of alternating bristles and haired projections that makes them hard to miss.  But those are not just for looks.  Hidden in the fuzziness can be urticating hairs which can cause painful reactions if they come into contact with skin.

This American Toad.

We also had a fun visit from the American Toad.  He, or she, was hopping along on its way home. We looked down and saw it sitting on a telescoping cover for a while when it was laying on the ground. After a little bit it moved over into a hole in the base of a tree next to where we were working. It definitely kept a keen eye on us.

 

Monarch Butterfly Caterpillar

This next happy little caterpillar is destined to become the Monarch Butterfly.

Although we rarely see Monarch Butterflies anymore due in part to the limited availability of their habitat – the plants of the milkweed family, every once in awhile we do get to see a caterpillar on milkweed at one of the farms we keep bees at.  The Monarch may be the most familiar North American butterfly, and it is considered an iconic pollinator species.

Much of the North American Monarch population migrates south in the late-summer/autumn to migration to Florida and Mexico. During the fall migration, monarchs cover thousands of miles, with a corresponding multi-generational return north. There has been a great deal of food and habitat loss that the Monarch needs to survive. Hopefully there will be some work done to help out the pollinators. Especially the Monarch.

Now that the weather is cold, and the bees are put to bed for the winter, we are thinking about all the other creatures we met this year!

Posted on by

Traps and Trays

Ever since we started beekeeping we have been using the West Trap in conjunction with the bottom board.  Over the years we have learned that it is very easy to see what is going on in the hive just by pulling the tray out.  We use the west trap to monitor hive activity when we need more clues as to how a colony is doing.  We clean them our regularly and keep them in all year long.  Most of the time just as a tray with no oil or liquid in them.

For instance, if you see a lot of fine chewed up brown or light brown cappings, you know that brood has hatched.  Remember, when the young bees chew out of their cells, the cappings just fall the floor of the hive. If you have a screened bottom board alone, it is not possible to see what is happening without a tray to catch the evidence.

How about white cappings?  This would mean that the bees are eating stored honey.  Unlike brood, which has a dark capping, honey typically has a white capping on it.  If this is observed, it is usually time to get a closer look.  It could mean robbing or, if outside of the normal nectar flow, that the bees do not have enough to eat and are eating stored resources.  Seeing sugar crystals may indicate this as well, since honey can crystalize and the bees will not be able to eat the crystals.  They simply clean them out of the cells.

If you varroa mites are observed then it may be time to see how infested the colony is.  Treating may also be in order.  How about if a hive beetle is seen hiding down there.  Beatles will be chased down into the trays by the bees and will stay there until they find a way up again.  Remember, the West Trap is actually a beetle trap.  When beetles are seen down there it is definitely time to put the “kill” agent in the trap.

To trap and kill hive beetles we use mineral oil.  It is an agricultural product that can be purchased by the gallon at most farm supply stores.  Some beekeepers use vegetable oil.  Either will work, but we prefer the synthetic oil that will not ferment on its own.  We add a tablespoon or so of cider vinegar as an attractant.  Hive beetles cannot resist the smell and enter the trap willingly only to drown in the oil.

If hive beetles are seen on frames the West Trap may not be enough.  We then turn to beetle blasters or some other trap that sits in between the frames.   These are filled the same way with mineral oil and cider vinegar.  Care must be taken so as not to spill them on the bees or on the frames.

How about during and after a mite treatment?  These trays are very useful when assessing mite drop.  How else would we know if a mite treatment has worked or not?  After the treatment period seeing dead mites on the tray would indicate that the treatment worked.

Since we use the screened bottom board we always have a west trap in the tray slot.  It allows us to see what our bees are doing, monitor and control pests, and help gauge treatment efficacy. Remember, it is not just trash down in that tray. It is vital beekeeping information!!!

Posted on by

Queen Acceptance, Weather, and Food

This year it has rained at least once every week since spring started.  Most weeks it has been raining twice a week at a minimum.  Now summer is supposed to have taken over and it is still raining way too much. This is not only disconcerting for the beekeeper but it is very disconcerting for the bees.  Worse yet, we are starting to see the problems that this has caused and the errors of our ways.

As most beekeepers do, we purchased packaged bees and new equipment for replacing our dead outs and expanding our operation.  We hived the packages and began feeding sugar syrup and pollen patties.  Once the nectar flow was starting, or scheduled to start, we removed the feed from the hives and added honey supers. The rain kept coming every week.

When we checked on them the bees never seemed truly happy. And we noticed that the new packages queens had a poorer acceptance rate than we are used to seeing.  We gauge this on the number of queen cells produced by colonies started as packages.  Nearly all were building at least one queen cell.  Some had multiples.  This despite the fact they had a queen that was laying eggs and apparently operating normally.  Usually this behavior is only seen in a few new package colonies and usually if they do it at first, the behavior goes away as the season goes on and the nectar flow starts.  We made a few nice nucleus colonies with these cells, but after a while it becomes very disheartening to keep destroying large swarm and supercedure cells.

Then during our inspections, we started seeing problems with mites.  But the problems are much more advanced that we have seen before.  Normally at this time of the year we would only see one or two mites occasionally if at all, especially on a brand new hive, but this time we are seeing many more.  We can actually see mites on some of the bees in the new hives that were packages just a few weeks before.  If you can see the mites on bees, just imagine how many there are on the rest of the bees and how many there are living beneath the cappings.  We removed drone brood to find hordes of mites.  This was very alarming.

To prevent problems down the road we decided to be proactive and we reached for our weapon of choice, mite away quick strips or MAQS. We saw some mites drop, but not as much as we expected.  At this point we were hopeful that the mites in the cells had died.

The treatment seemed to exasperate the problems that we were seeing with queen acceptance and absconding.  Now where there were just a few cells we saw six. Where there were six we saw a dozen. We tried re-queening a few with new queens from our supplier, but the same thing happened all over again.  So we decided to let nature take its course.  Most of our new package hives swarmed because of all the cells that they kept producing. Others completely absconded by the end of the season.

After it was all over we realized that their lack of food caused by the inability to forage, the mite treatments, and our inability to realize that we needed to feed the bees during the time of stress, all contributed to the problems that we were having.  The problem ended in a honey crop failure for us.  Lots of rain did not produce lots of usable nectar for our little bee friends.  Hopefully the goldenrod flow will be good this fall. We will try to get some this year, despite the fact that we have not had good luck chasing this elusive honey before.

Posted on by

More Equipment

This is a big year for us – we are expanding!!!  This year we will nearly double the number of colonies that we are managing.  This means that we need more equipment.  Boxes and frames and foundation galore!  For us this meant another trip to Dadant to get the supplies.  It sure seems like these trips are becoming more common!

This last trip to Dadant punctuates the need for a proper vehicle that is fit for beekeeping.  Cars and minivans are nice, but they just cannot compare when it comes to transporting beekeeping equipment!  On the return trip from Dadant it became apparent that we had maxed out the abilities of the minivan that we borrowed.  The suspension was bottomed on the frame for most of the way home.

Our normal beekeeping vehicle is an old Buick.  It is on its last leg.  Its back seat is stained with propolis and is sticky with honey from placing boxes on the seats. Its floor covered in Honey Bee Healthy, Pro Health and sugar syrup from transporting feeder buckets. The trunk smells like a bee smoker. It has served us well, but we have definitely outgrown it.

Assembling 200 frames in the living room may be cozy, but it has its downfalls as well. Annoying the neighbors with pounding or nailing, cleaning up glue, and storage all become major issues. After a few years of beekeeping it has become apparent that if one is to stay a beekeeper, it is necessary to have a workshop to do this type of work in.

For the time being, our friend John has a workshop that we can use to build some of our equipment and even make some custom pieces like our candy boards and our custom inner covers. He has a great table saw that will stop the blade if you touch it with a finger.  It is nice to know that the saw will lessen the chance of losing a valuable finger!  His chop saw and air compressor come in handy too.  We know what we will need when we want to equip our own shop.

So in the future, we will need at least one truck and a workshop to build and paint equipment in.  Not to mention a place where we can extract all that sweet yummy honey!

Posted on by

Winter Preperation

Winter in Illinois is becoming more and more unpredictable.  After experiencing losing all of our bees due to the harsh winter in years past, we are taking more preventative steps now.

Treating for mites is becoming more and more important.  Even though we are using small cell foundation, our bees still seem to harbor a higher than average number of mites.  Guidance on the number of mites that is acceptable on a test sample seems to always be in flux depending on the literature read or the person giving the advice.  But one trend is for certain, the acceptable number seems to be going down.

Our fall treatment showed mite drop and the bees seemed to be ok after the treatment.  On a few of our colonies we think that either the mite treatment was too strong or the mites damaged the hives too much before we treated because a few were lost before the slow was flying.  Luckily the rest seem to be in good shape right now.

We purchased a roll of winter wrap that can be cut into any size depending on the equipment that we are using.  This is handy as it will allow us to “wrap up” a stack of ten frame equipment, or a single nucleus colony, or a group of nucleus colonies.  We will simply cut what we need.  It is also great that the manufacturer claims the product to be reusable for many years.

The outer layer is a thick black plastic that absorbs heat and acts as a wind break.  The inner layers are foam insulation that will keep the heat in.  When it gets cold and windy, this is what our hives need!

We are also placing a notched candy board with an upper entrance on the hive.  This will allow humidity, which rises with warm air, to escape out of the hive.  Some of the humidity will be absorbed by the candy board and this will make the sugar tasty and readily available for the bees to eat.   Our winter wrap covers the sides and up over the top of the candy board.  Hopefully this will keep the girls warm and well fed in the winter!

The candy board recipe that we use is the classic one from the Hive and the Honeybee.  It is as follows:

15 pounds of white granulated sugar
3 pounds (or one quart) of light corn syrup
1 quart of water
1/2 teaspoon of cream of tartar

We combine all the ingredients into a large pot and stir it with a paint stir on the end of a drill.  Once completely combined, heat until it reaches at least 242 F stirring occasionally so it does not burn on the bottom.  The heat source should be a strong one.  Most kitchen stoves will not produce enough heat to make candy boards in a timely manner.  We usually heat until 244 – 246 F but not over 248 F.  Let it cool until it is below 200 and then stir it up again and pour it into the candy board container.

We place our candy boards on the hives and wrap them just before Thanksgiving.  Some beekeepers in our area do it just after Thanksgiving or in mid-December.  Since bees need to eat and it can get cold and snow in December, we do it early!

About mid winter, we place pollen patties to help with buildup.  The bees need to stay strong and start rearing new bees for the new year.  Then the cycle will continue.  I wonder how many mites there are?  I wonder how healthy the bees will be?  I wonder how much honey the bees will produce?

Posted on by

Varroa Mites VS MAQS

Varroa mites are becoming more bothersome.  This year we treated in the spring and in the fall after we took our honey off.

Sticky boars have been our monitoring tool of choice.  When we used a sticky board to test we had results from 10 to 50+ mites dropped in a twenty four hour period.  This method of sampling is nice, neat and easy.  But I do see difficulties with it.  It only measure the number of mites being dropped. It does not measure those on the bees or, better yet, living in the cells.  It is the ones in the cells we need to worry about!  It does not seem like this sampling method takes into account any hygienic behavior either.  If the bees groom off mites as they come into the hive then a lot will drop, and I would assume that I have a ton of mites in the hive.  Instead, in this case, it would indicate the bees doing the hygienic job that we desire.  Maybe a better monitoring method is available.

We have treated in the spring and the fall with Formic Acid strips.  They actually look and feel more like a patty, but they are referred to as strips.  The product is called MAQS by NOD Apiary.  This will be the second year we have used this product.
MAQS may prove to be quite valuable because they claim it is not very hard on the bees and that it can kill mites in the capped brood cells as well as on the bees.   The strips smell harsh and the bees quickly move away from it when you get it near them, so I do not know how well it will work, especially in high concentrations in the long run.  Monitoring and planning hive ventilation and maximum daily temperatures during the treatment period are key when using this product.  So treating all the time with it may be difficult, even though treatment is allowed with the honey supers on.

Our spring treatment showed some mite drop, but the fall drop was enormous.  Hopefully it will save some of our colonies from dying from the parasitic mite.

 

Posted on by

Disaster Hits the Almond Orchards This Year

Honeybee_Almond_BloomAlmond pollination in California requires the use many colonies or hives of bees.  This year, more than 1.6 million bee colonies were used to pollinate the California Almond crop. Nearly all of these colonies were brought in from other states by an army of 1,300 commercial beekeepers.

This staggering number of honeybee colonies accounts for approximately ninety percent of all of the honeybees in the United States.   After pollinating almonds, these bees are often used to pollinate other crops, such as apples, cranberries, cherries and watermelons. Any losses seen during or right after almond pollinating season cascades into the pollination of other crops and into the packaged bee industry, which is what allows new beekeepers to start colonies and existing beekeepers to replace winter losses.

At an impromptu meeting on March 24 in Los Banos, California between beekeepers and the U.S. Environmental Protection Agency, 75 beekeepers stated that three-quarters of their hives showed very significant damage.  More beekeepers weighed in later.  It was found that after waiting a few more weeks approximately 60% of all colonies that pollinated almonds showed damage. That is nearly a million honeybee colonies.

The reason why the pesticide losses do not happen right away is because of bee biology and the way bees work to produce their young in the hive.  Bees gather pollen an nectar and store it for later use.  This includes the raising on new bees.  Since bees only live about 28 days, new bees are being raised all the time in a healthy colony.  When nectar and pollen is contaminated it will continue to kill bees even after the bee that brought it to the hive is long gone.  This is why such a high percentage of colonies say dying brood, or young bees still in the cells, on such a large scale.  Many of the pesticides in use are labeled as “safe for use on adult bees.”  This means that these pesticides were only tested on bees that were flying around but the testing never included any investigation into brood rearing or other long term exposure issues.

Beekeepers in California are blaming their losses on pesticides used on the Almond trees.  Almond growers have no restrictions on when and how they can apply pesticides to their trees and that is a large part of the problem, but an even bigger part are that the residue from these pesticides kill bees and kill bee brood, no matter when it is applied.

The EPA and the USDA have claimed for years that pesticides are not hurting honeybees and other pollinators.  This event shows absolute proof on a large scale that pesticides used on Almond trees are dangerous to honeybees.  These are the same chemicals that are used on the vast majority of food crops in the United States. Almond growers typically apply one or a mix of pesticides – which can include clothianidin, dinotefuran, imidacloprid and thiamethoxam. This year tank mixing from two new products, tolfenpyrad and cyantraniliprole were used.

The EPA and tBlooming almond trees being sprayed.he USDA has failed to keep pesticides from killing pollinators.  Instead pesticide related bee deaths have increased exponentially.  Because of this and the fact that the beekeeping industry is deemed as insignificant, beekeepers are not protected by any laws or given payment for damages caused by pesticide exposure. This is despite the fact that pollination services provided by honeybees are responsible for 30 billion dollars worth of food annually.

Not only has the EPA and USDA done nothing to protect pollinators, but they have done nothing to assure consumers that any of the above mentioned pesticides are truly safe to be used on food crops.  All beef and dairy cows are exposed to them on a daily basis through the corn silage they eat.  Nearly all commercially raised vegetables are sprayed with them.  Even the plants you purchase at home and garden centers in the spring have been treated with them.  After the sprayers have left the fields and treated seeds have sprouted and been harvested as a food, everybody forgets about the pesticides that may be present.  Nobody knows exactly how much of these systemic pesticides make it into the food chain as corn products, soybeans products, dairy products, beef, and fruits and vegetables. To date, no official testing has been done on this yet.

If the losses in the beekeeping industry do not stop, the beekeeping industry cannot continue to survive.  New regulations, stiff penalties and fines for those responsible for colony death, and the banning of insecticides, fungicides and insect growth inhibitors are the only way to save the industry before it dies with the bees.

To read more about this issue, please read the press release from the Pollinator Stewardship Council or visit this topics thread on their website.